pt老虎机最信誉平台

Cross-Rigid rubber belts

Cross Rigid conveyor beltpt老虎机平台官方娱乐

It is based in the following main components:

(1) Cross-stabilized Base Belts
(2) Sidewalls
(3) Cleats

Sidewall conveyor belt has been designed with two corrugated sidewalls and cleats molded to cross-rigid base belt can carry heavy product loads up to the inclined angle of 75.This belt is popular
where space is at a premium and steep incline angles are desired.

老虎机pt国际娱乐平台

The base belt is designed to bend efficiently in a longitudinal direction and has greater rigidity in a transverse direction by utilizing reinforced fabrics with monofilament,creating a fabric carcass of high
tension.

pt老虎机平台开户平台

Cross Rigid Conveyor Belt can be deflected from the horizontal to an incline or vertical and back again without bowing or sagging.These deflection points as well as the belt returning on free lateral space by snub idlers definitely require the cross-rigidity of the base belt.

The designed mono-filament fabrics provide better returnside support,no wear and tear of cleat and cover rubber is available with various compounds like abrasion resistance oil,heat,and flame resistance.

pt老虎机信誉平台推荐

EXAMPLE OF BASE BELT

BASE BELT TYPE:

XE CROSS RIGID BASE BELT TYPE

BELT COMPOSITION: CROSS RIGID BELT COMPOSITION手机老虎机pt试玩平台

X=Cross-Stabilized Construction
E=Polyester Tension Plies
+1=One Ply of Cross-Stabilized
+2=Number of Separate Cross-Stabilizing Plies

pt老虎机平台首存优惠

cross rigid CONSTRUCTION

XE+2:is a mulitiply construction with cut edges
based upon carcass of EP fabric and one
monofilament ply on each side of the EP carcass
integrated into the upper and lower cover.